Showing 1–16 of 20 results
Chimney Bird and Rain Guard Cowl – Strap Fixing
CHIMNEY287
Our best selling Chimney Bird Guard for over
Rated 4.94 out of 5
Our best selling Chimney Bird Guard for over a decade. This Chimney Cowl will look really neat too on top of your Chimney and confident you won't be disappointed. Available in Aluminium and Stainless Steel and Natural (Silver), Terracotta, Buff Stone or Black also.
Fits all flues 150mm -250mm internal diameter,
Standard Square Disused Chimney Cap – Strap Fixing
CHIMNEY742
Square Chimney Cap for Disused Chimneys - This
Rated 5.00 out of 5
Square Chimney Cap for Disused Chimneys - This Chimney Cap will fit Chimney Pots up to 330mm x 330mm (13" x 13") Covering Chimney Pots with and internal diameter between 150mm to 250mm (6" to 10"). Rain entry into redundant chimneys is one of the main causes of structural decay
Colt Top 2 Chimney Cowl – Static Multifuel Anti-down Draught Cowl
CHIMNEY288
Colt Top 2 Chimney Cowls - The Colt
Rated 5.00 out of 5
Colt Top 2 Chimney Cowls - The Colt Top 2 Anti Down Draught Chimney Cowl is ideal for use with any fuel type including Smokeless Fuels e.g. Coalite, Anthrasite or Furnite. Corrosion resistant - Available in Terracotta or our Limited Edition Black Finish with strap fixing.
Fits all flues from 125-250mm
Square Bird and Rain Guard Cowl – Strap Fixing
CHIMNEY401
The Square Chimney Bird and Rain Guard Cowl
Rated 5.00 out of 5
From £32.00
The Square Chimney Bird and Rain Guard Cowl helps prevent the nuisance caused by birds, squirrels, leaves or other debris is now easily remedied by the fitting of a Birdguard.
The Square Chimney Bird and Rain Guard Cowl is a superb Chimney Cowl and you won't be disappointed.
Dispatched from our UK
Decorative Chimney Bird Guard | Jackdaw Guard
CHIMNEY291
Chimney Bird Guard, Protect Chimney from Birds, Decorative
£18.00
Chimney Bird Guard, Protect Chimney from Birds, Decorative Bird Guards.
We have recently had 3 Black Decorative Bird Guards returned from a customer due none compliance with their Listed Building Regulations. Their house was listed Grade II.
There are a couple of scuff marks which are not really noticeable and especially wont
Standard Chimney Capper – Strap Fixing
CHIMNEY747
Rain entry into redundant chimneys is one of
Rated 5.00 out of 5
From £16.20
Rain entry into redundant chimneys is one of the main causes of structural decay to chimney stacks. The decay, caused by the natural freeze/thaw cycle of the weather, can ultimately cause great expense. Water works its way into the mortar between the brickwork and as it freezes, expands, eventually leading
Brewer UFO Mark II Chimney Cowl – Strap Fixing
CHIMNEY3
The Brewer UFO Terracotta Cowl is the Ultimate
Rated 5.00 out of 5
The Brewer UFO Terracotta Cowl is the Ultimate Flue outlet. The UFO Brewer Chimney Cowl comes fully assembled including a factory fitted birdguard and is the Cowl of choice by many of our Gas fitting appliance trade accounts. Order your Chimney Cowl securely online now.
Dispatched from our UK Warehouse direct
Stainless Steel Traditional Super H Cowl
CHIMNEY221
The Stainless Steel Traditional Super H Cowl is
Rated 5.00 out of 5
From £97.00
The Stainless Steel Traditional Super H Cowl is designed to ensure that no matter what the wind direction or strength the flue or chimney is protected from downdraught. As the wind passes down the top of the external parts, it creates a wind flow that exhausts the smoke and fumes
Rotorvent Ultralite 2 Spinning Chimney Cowl
CHIMNEY752
Rotorvent Ultralite 2 Spinning Chimney Cowl - is
Rated 5.00 out of 5
Rotorvent Ultralite 2 Spinning Chimney Cowl - is a highly competitive, top quality best selling revolving anti downdraught cowl and ventilator for use on flues and chimneys.
Rotorvent Ultralites can also be used on land fill sites to extract gases, and as general purpose ventilators.
Crown Pot Chimney Cowl
CHIMNEY791
We are pleased to have introduced the following
Rated 5.00 out of 5
From £88.00
We are pleased to have introduced the following Crown Pot Chimney Cowl to our range. This Crown Pot Chimney Cowl has been designed to slot into the full length of the Crown Pot. The Chimney Cowl is then secured at the bottom with a strap fixing of which is provided
Brewer Aerodyne Chimney Cowl – Strap Fixing
CHIMNEY218
Brewer Aerodyne Chimney Cowl Aluminium Strap Fixing -
From £42.00
Brewer Aerodyne Chimney Cowl Aluminium Strap Fixing - has been in constant production for about 50 years and has abundantly proven its worth in curing downdraught, showing that the laws of aerodynamics don't change.
Bonnet Chimney Cowl
CHIMNEY223
Bonnet Chimney Cowl - Designed on the traditional
£38.00
Bonnet Chimney Cowl - Designed on the traditional in terracotta, the Brewer Bonnet Cowl has the advantage of being one size to suit all chimney pots with an internal diameter between 150mm and 250mm (6" to 10").
This Cowl is made to order - approximately 7-10 working days
Crown Birdguard and Chimney Cowl
CHIMNEY794
The Crown Birdguard Chimney Cowl is designed to
The Crown Birdguard Chimney Cowl is designed to protect and prevent birds and debris from entering your chimney. It achieves this with the use of a wired mesh designed to prevent unwanted entry into your system whilst also allowing smoke and fumes to be exhausted efficiently. Fitted with an integral
Flue Cube Chimney Cowl – Built for Stoves
CHIMNEY792
The British manufactured Flue Cube is the UK's
£298.00
The British manufactured Flue Cube is the UK's most effective problem-solving chimney cowl, offering value-for-money by improving and completing your stove experience. It is guaranteed to work and to last. The FlueCube will fit onto a standard round Chimney Pot or Twin Wall System with an internal diameter between 127mm
Standard Stainless Steel Cowl Bird Guard – Strap Fixing
CHIMNEY756
Standard Stainless Steel Bird Guard Chimney Cowl and
Rated 5.00 out of 5
£58.00
Standard Stainless Steel Bird Guard Chimney Cowl and Bird Guard
Spinning Aspirotor Chimney Cowl
CHIMNEY743
The Aspirotor is a great solution for problems
From £128.00
The Aspirotor is a great solution for problems with downdraught. Using the wind against itself, the stainless steel turbine shaped head catches the wind causing it to rotate creating increased draw up the flue.