Square Terracotta Disused Chimney Cap from Chimney Cowl Products
Standard Square Disused Chimney Cap - Strap Fixing From £27.60 From £19.99
Rotorvent Ultralite Spinning Chimney Cowl from Chimney Cowl Products
Rotorvent Ultralite 2 Spinning Chimney Cowl £69.95

The Aspirotor is a great solution for problems with downdraught. Using the wind against itself, the stainless steel turbine shaped head catches the wind causing it to rotate creating increased draw up the flue.

In Stock

Sku:CHIMNEY743

£99.99

  • Natural
  • Terracotta
  • Black
  • Stainless Steel
Clear selection
Compare

Description

Suitable Fuel
Wood (Solid Fuel)
Coal
Oil
The Spinning Aspirotor Chimney Cowl is a great solution for problems with downdraught. Using the wind against itself, the stainless steel turbine shaped head catches the wind causing it to rotate creating increased draw up the flue.

The Aspirotor can be used with every fuel type
.
Requires approximately 4mph winds to start rotation.

Standard fixing kit included

Size

The Spinning Aspirotor is available in two sizes. The Model 150 for internal diameters between 115mm to 180mm (4.5? to 7?) & the Model 200 for internal diameters between 180mm to 230mm (7? to 9?).

Weight 2 kg
Choose Colour

, ,

Choose Metal

Its sometimes difficult to choose the correct size of Chimney Cowl. We have the perfect solution and can be done from ground level as well. If you can accurately guess the size or width of the chimney pot from the floor you can order the right Cap or Cowl from Chimney Cowl Products. The good news is this is relatively easy once you know the rough size of a house brick and the thickness of the walls of a chimney pot. Using either the naked eye or a set of binoculars get a ‘side on’ view of the chimney pot you wish to cap or fit a chimney cowl, then find a full sized brick nearest to the chosen pot as a reference, normally directly underneath. Now imagine that the brick is placed on top of the chimney pot itself and make a mental note whether it would fit inside, hang over, or sit flush. It may sound silly but once you know that the width of an average UK house brick is 225mm ( 9″ ) for imperial or 215 ( 8 and half ” ) on a modern property, it provides a very accurate impromptu tape measure. The other factor you may need is internal pot size, this can also be guessed quite accurately if you know the average thickness of a chimney pot is about 25mm ( 1″ ) , simply factor this in and you can work out most chimney pot width’s quite accurately. If you have large decorative rolls on top of the pot, make an allowance for this by guessing, using a brick as your guide.
Chimney Cowl Products - Your family run business proudly capping the UK for over 15 years...
Back to Top
preloader