Square Terracotta Chimney Cowl from Chimney Cowl Products
Brewer UFO Anti-Downdraught Square Cowl £59.99
Chimney Spark Arrestor from Chimney Cowl Products
Spark Arrestor £75.99

If you have a problem with birds or squirrels trying to make a home in your chimney then the Mesh Top Birdguard is a great defence that is less prominent than other models.

In Stock

Sku:CHIMNEY779

From £45.00

  • Solid Fuel
  • Coal Fuel
  • Gas Fuel
  • Oil Fuel
  • Natural
  • Terracotta
  • Buff Stone
  • Black
Clear selection
Compare

Description

The Mesh Top Birdguard can be fitted to a solid fuel system (wood, coal and oil) using an inch by inch mesh or it can be fitted to a gas system using a ? inch by inch mesh to comply with current regulations. If you have a problem with birds or squirrels trying to make a home in your chimney then the Mesh Top Birdguard is a great defence that is less prominent than other models.

A Mesh Top Birdguard will fit onto a round or square chimney pot with dimensions between 150mm & 250mm (6? to 10?).

The Mesh Top Birdguard is made from stainless steel and can be either natural (unpainted) or painted terracotta, buff or black.

Fitting

The Stainless Steel Mesh Top Birdguard is fitted to the chimney pot via the use of a simple and secure leg and stainless steel strap system.

Weight 2 kg
Choose Fuel Type

, , ,

Choose Colour

, , ,

Its sometimes difficult to choose the correct size of Chimney Cowl. We have the perfect solution and can be done from ground level as well. If you can accurately guess the size or width of the chimney pot from the floor you can order the right Cap or Cowl from Chimney Cowl Products. The good news is this is relatively easy once you know the rough size of a house brick and the thickness of the walls of a chimney pot. Using either the naked eye or a set of binoculars get a ‘side on’ view of the chimney pot you wish to cap or fit a chimney cowl, then find a full sized brick nearest to the chosen pot as a reference, normally directly underneath. Now imagine that the brick is placed on top of the chimney pot itself and make a mental note whether it would fit inside, hang over, or sit flush. It may sound silly but once you know that the width of an average UK house brick is 225mm ( 9″ ) for imperial or 215 ( 8 and half ” ) on a modern property, it provides a very accurate impromptu tape measure. The other factor you may need is internal pot size, this can also be guessed quite accurately if you know the average thickness of a chimney pot is about 25mm ( 1″ ) , simply factor this in and you can work out most chimney pot width’s quite accurately. If you have large decorative rolls on top of the pot, make an allowance for this by guessing, using a brick as your guide.
Chimney Cowl Products - Your family run business proudly capping the UK for over 15 years...
Back to Top
preloader