Description
About the Flue Cube Chimney Cowl
The British manufactured Flue Cube is the UK’s most effective problem-solving chimney cowl, offering value-for-money by improving and completing your stove experience. It is guaranteed to work and to last. The FlueCube will fit onto a standard round Chimney Pot or Twin Wall System with an internal diameter between 127mm to 150mm (5” to 6”)
How the Flue Cube Chimney Cowl works
Existing and newly installed wood burners will greatly benefit from the addition of a FlueCube chimney cowl. Your stove will produce less soot and smoke, while burning at a hotter temperature yet using your fuel more efficiently.
It achieves this by creating a positive draw through the flue system, stabilising the burn within the stove and thus enabling the stove to perform with much greater efficiency, consuming a larger amount of black carbon (soot) than would previously be possible. The FlueCube also enables stoves to be installed in areas of low pressure and thermal disturbance that are normally restrictive for stoves. In addition, the FlueCube solves problems routinely occurring with short chimneys, for example on bungalows, conservatories and single storey extensions and work spaces, or where the chimney is below the roof line.
The FlueCube is a chimney cowl designed and manufactured to improve the experience of wood burning, multi fuel stoves, oil fired stoves.
Specifications of the Flue Cube Chimney Cowl
Painted models are finished in high quality, high temperature stove paint.
Frequently Asked Questions
Question: How Big is a Flue Cube?
Answer: The FlueCube is 30.5cm long with a width of 30.5cm; with a choice of 4 colours, the FlueCube blends in with your current chimney. You won’t notice it is there but you will notice the benefits.
Question: How Easy is it to install a Flue Cube?
Answer: Easy to install but you need to be safe on ladders and roofs so don’t try it if your are not used ladders and roofs.
Question: How efficient will my wood burner become with a FlueCube Chimney Cowl Installed?
Answer: The FlueCube’s unique design enables the wood burning stove to burn fuel more efficiently leaving only ash dust at the bottom of your stove.
How efficient overall your wood burner becomes with a FlueCube will depend on a number of factors; the fuel you burn, make of stove, length of chimney, the location of your home, so we can’t put a definitive figure on efficiency. What we can say is our customers have all seen a positive improvement.
Question: How does the Flue Cube help the environment?
Answer: By creating a positive draw through the flue system stabilising the burn within the stove and thus enabling the stove to perform (burn) at a much greater efficiency consuming a larger amount of black carbon (soot) then would previously be possible. (Black Carbon is widely acknowledged to be a significant contributor to Arctic ice-melt )
Note:The FlueCube is supported by Low Carbon Kent, where we are located, because of its potential to reduce black carbon.
Question: Does the FlueCube work on Small Chimney’s
Answer: Please find out more Short Chimney | Flues
Question: Does the FlueCube work with Multi Fuel Stoves Aga’s and Rayburns?
Answer: As long as you have a flue or flexi liner in the chimney the FlueCube will work with these stoves. It will also improve the performance of stoves and stop downdraft issues
Steve Marquis –
Terrific service in our hour of need with smoke coming down the chimney due to an old and wind damaged cowl. Quick to install the replacement (scary trip up a ladder on the roof), and now warm and smoke free.
Thank you!
Chimney Cowl Products –
Hi Steve, thank you for your review and really please everything is sorted.
Best wishes
Paul
Chimney Cowl Products
Chimney Cowl Products –
The cowl is amazing! We can relax whatever the wind is doing and the burn rate on wood has reduced so it’s already started paying for itself!