Spinning Chimney Cowl from Chimney Cowl Products
MAD Spinner Cowl £105.00
Rotorvent Spinning Cowl Opening Kit
Rotorvent Opening Kit £40.00

Brewer UFO Anti Downdraught Chimney Liner Cowl – If you have a problem with downdraught and are burning solid fuel (wood, coal or oil) or using a gas system then the UFO (Ultimate Flue Outlet) Flue Liner Cowl is a great solution and has been used for many years to great effect. The UFO?s specially shaped discs channel wind to create an updraught (or lower pressure) at the top of the system to counteract wind related downdraught.

In Stock

Sku:CHIMNEY755

£103.95

Compare

Description

What is it for?

If you have a problem with downdraught and are burning solid fuel (wood, coal or oil) or using a gas system then the UFO (Ultimate Flue Outlet) Flue Liner Cowl is a great solution and has been used for many years to great effect. The UFO?s specially shaped discs channel wind to create an updraught (or lower pressure) at the top of the system to counteract wind related downdraught.

What sizes & options are available?

The UFO Flue Liner Cowl comes in 3 standard sizes of 150mm (6?), 178mm (7?), and 200mm (8?).

It is made in stainless steel available in natural (unpainted), or powder coated terracotta, buff or black.

Fitting

For gas systems

The UFO Flue Liner Cowl is supplied fully assembled. For the gas version it is fitted with a mesh made to comply with current regulations. The hanger is attached to the flue with the use of an internal sleeve and stainless steel strap system along with an external leg and stainless steel strap system.

For solid fuel systems

The UFO Flue Liner Cowl is supplied fully assembled. For the solid fuel version it is fitted with a recommended mesh of made up of 1? x 1? squares. The hanger is attached to the flue with the use of an internal sleeve and stainless steel strap system along with an external leg and stainless steel strap system.

Delivery

Approx 7-10 Working Days

Weight 2 kg

Recent Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Its sometimes difficult to choose the correct size of Chimney Cowl. We have the perfect solution and can be done from ground level as well. If you can accurately guess the size or width of the chimney pot from the floor you can order the right Cap or Cowl from Chimney Cowl Products. The good news is this is relatively easy once you know the rough size of a house brick and the thickness of the walls of a chimney pot. Using either the naked eye or a set of binoculars get a ‘side on’ view of the chimney pot you wish to cap or fit a chimney cowl, then find a full sized brick nearest to the chosen pot as a reference, normally directly underneath. Now imagine that the brick is placed on top of the chimney pot itself and make a mental note whether it would fit inside, hang over, or sit flush. It may sound silly but once you know that the width of an average UK house brick is 225mm ( 9″ ) for imperial or 215 ( 8 and half ” ) on a modern property, it provides a very accurate impromptu tape measure. The other factor you may need is internal pot size, this can also be guessed quite accurately if you know the average thickness of a chimney pot is about 25mm ( 1″ ) , simply factor this in and you can work out most chimney pot width’s quite accurately. If you have large decorative rolls on top of the pot, make an allowance for this by guessing, using a brick as your guide.
Chimney Cowl Products - Your family run business proudly capping the UK for over 15 years...
Back to Top
preloader