Product Description
The Brewer UFO Terracotta Cowl is the Ultimate Flue outlet. The UFO Brewer cowl comes fully assembled including a factory fitted birdguard.
• The Brewer UFO Cowls Adjusts to fit 150 to 250mm (6" to 10") internal diameter flues and pots.
• The Brewer UFO Cowls come complete with a stainless steel high security strap and leg fixing.
• The Brewer UFO Cowl is a 1.2mm thick quality aluminium alloy, powder coated finish in terracotta colour as standard.
• Suitable for Gas Flues*
• Suitable for Solid Flues - We will provide you with a factory assembled Cowl and Mesh ready for installation on a solid fuel system
• Suitable for Oil Fules
*The Brewer UFO Chimney Cowl is the Chimney Cowl of choice by many of our Gas fitting appliance trade accounts.
This Chimney Cowl is complete with a Strap Fixing Kit.
More Information
The Antidowndraft cowl by Brewer for all fuels and systems
The Ultimate Flue Outlet originally introduced in 1995, was the first gas chimney cowl in the UK to pass the rigorous requirements of BS715:1993 (200mm). Its ever increasing market share is testimony to its extensive benefits and advantages over other cowls.
Now the new U.F.O. Mk II is here! It does all that the original U.F.O. does, but its new adjustable upstand addresses the greater smoke demand of solid fuels
What do you get:
• Fully assembled including factory fitted bird guard.
• Adjusts to fit 150 to 250 mm (6-10") flues and pots.
• Stainless steel high security strap and leg fixing.
• 1.2mm thick quality aluminium alloy, powder coated finish in terracotta colour as standard.
• Tested and certificated (Certificate No. BG/TR/95/96) to BS 715: 1993 (200mm)
• Suitable for all gas appliances to BS 5871, 1991, Parts 1,2 & 3 - including radiant gas fires, coal and log effect gas fires, vertical flued gas boilers etc.
• Performance tested for use on oil appliances by OFTEC.
• Better rain and bird protection than other cowls.
Choosing the Correct Size
How to choose a Chimney Cap or Chimney Cowl for your Chimney PotIf you can accurately guess the size or width of the chimney pot from the floor you can order the right Cap or Cowl from Chimney Cowl Products. The good news is this is relatively easy once you know the rough size of a house brick and the thickness of the walls of a chimney pot.
Using either the naked eye or a set of binoculars get a 'side on' view of the chimney pot you wish to cap or fit a chimney cowl, then find a full sized brick nearest to the chosen pot as a reference, normally directly underneath.
Now imagine that the brick is placed on top of the chimney pot itself and make a mental note whether it would fit inside, hang over, or sit flush. It may sound silly but once you know that the width of an average UK house brick is 225mm ( 9" ) for imperial or 215 ( 8 and half " ) on a modern property, it provides a very accurate impromptu tape measure.
The other factor you may need is internal pot size, this can also be guessed quite accurately if you know the average thickness of a chimney pot is about 25mm ( 1" ) , simply factor this in and you can work out most chimney pot width's quite accurately.
If you have large decorative rolls on top of the pot, make an allowance for this by guessing, using a brick as your guide.
That's it, our range of Chimney Cowls and Caps are all available for immediate delivery.
01624 845272
